KOREKTOR DO ZABEZPIECZANIA RYS
Sztyft do naprawy lakieru QUIXX pokazuje swoje pełne możliwości, gdy specjalny środek polerski już nie pomaga. Radzi dobie nawet w ekstremalnie trudnych przypadkach: bardzo głębokie zarysowania i zadrapania, które mogą sięgać nawet do podkładu, a także odpryski po uderzeniach kamieni na lakierze. Dzięki specjalnej końcówce sztyftu i prawdziwemu lakierowi bezbarwnemu zawartemu w sztyfcie wypełnia on głębokie uszkodzenia, naprawia je, a tym samym zapobiega korozji i utlenianiu.
Szczegółowe informacje o produkcie:
- Do wszystkich farb i lakierów połyskowych (także metalicznych)
- Łatwe, szybkie i skuteczne użycie w jednym etapie
- Lakier bezbarwny w sztyfcie bardzo harmonijnie łączy się z oryginalnym lakierem
- Specjalna końcówka sztyftu umożliwia bardzo precyzyjną pracę
- Bardzo krótki czas schnięcia
- Zastępuje drogie naprawy i pomaga utrzymać wartość
- Chroni przed rdzą i utlenianiem
- Efekty o profesjonalnej jakości
- Zawartość: 1 sztyft z lakierem bezbarwnym
How to do!
Our Step by Step Repair Guide explains clearly how to treat deep scratches, even down to the primer, with the QUIXX Paint Repair Pen and at the same time prevent corrosion and oxidation.
Click your way through the pictures on the right to go through the repair process step by step.
1. Thoroughly clean the area to be treated. The surface must be dry and free of dirt and grease. Shake the pen well for approx. 30 seconds, then remove the cap and vent the pen by pressing on the felt tip with the tip pointing upwards. Then press the tip onto a piece of paper as often as necessary (up to 20 times) until the clear coat flows into the felt tip.
2. Place the tip on the scratch and carefully guide it along the scratch. Dab stone chips several times. Remove any excess clear coat around the damaged area immediately with a clean and dry paper towel.
3. Repeat the application after every 30 minutes drying time to treat deeper damage and build up thicker layers of clear coat. Firmly replace the cap after use to prevent the pen from drying out.
4. After leaving to dry for at least 48 hours the repaired area can be polished to a beautiful smooth and glossy finish with QUIXX Paint Scratch Remover (Finish No. 2).