Car care

2-Step Paint Scratch Remover


Scratch removal step-by-step

Before starting to remove scratches from the vehicle, please attentively read the complete instructions and strictly adhere to the instructions to prevent incorrect application.

 

 

  1. Wet the 3000 grit sandpaper included in the repair kit.
    Gently sand the damaged spot for a maximum of 15 seconds.
    Do not attempt a 2nd sanding. Never sand the same area for more than 15 seconds maximum. Failure to comply with this warning could result in the removal of the entire clear coat or paint, which would leave behind stains.

    In case of light scratches skip step 1.
  1. Remove any water and grinding residues and simply apply a small
    amount of QUIXX REPAIR Tube #1 to the scratch.
  1. Polish the area with QUIXX REPAIR #1 and the included polishing rag for about 2 minutes applying a lot of pressure.
    Do this at a right angle to the scratch until all traces have vanished completely. The polishing pastes that are part of the QUIXX REPAIR system work better and more quickly if you apply more pressure during the polishing process.
  1. Remove any REPAIR #1 residue using a moist rag and apply a
    small amount of QUIXX FINISH Tube #2 to the scratch.
  1. Now polish the area with QUIXX FINISH #2 and the second
    enclosed polishing rag for about 2 minutes, applying a lot of
    pressure. Use circular motions until the area has a glossy
    appearance.

ATTENTION! Important additional information:

  1. Never sand the same area for more than 15 seconds maximum. Failure to comply with this warning could result in the removal of the entire clear coat or paint, which would leave behind stains.
  2. The polishing pastes that are part of the QUIXX REPAIR system work better and more quickly if you apply more pressure during the polishing process.